Thursday, June 18, 2015

New load from the kiln

Its been very nice so far in Wisconsin this spring. Wet and warm at times, but no complaining from the peanut gallery.

Just got several new loads from the kiln. Some stunning material. Flame birch in 5/4 , 6/4 and 8/4 and the same in birdseye maple and tiger maple. Even got a few pieces of 12/4 birdseye and curl mix. Those will make someone a stunning pencil post bed or turned bowls.

The wood business has been doing ok. I have had several new customers and they all seem to be happy with the material. I seem to be sending out more pallets lately as well. Had to buy more new pallets. Longer so it was easier for Fastenal and other trucking companies to haul them.

Its getting full in the shop. I am fortunate to have my grandson come help me a couple days a week.
Lots of unloading , stacking, measuring and checking figure. I wish at times it was easier, but I have to lift each and every board several times from when it starts air drying to when its finally put away. I probably touch each piece 6 or 8 times in the process. I guess I am not into "lean" processes.
I will be offering a veneer slicing service. I have contacted a company that slices veneer from boards. They steam it and slice it, anywhere from 1/42" to 1/16". If this is something you are looking for, let me know. Its not inexpensive, but if you want to work a lot of surface, it can be done. This is not something for 1 or 2 boards though.


These are a log set of wide 6/4 flame birch. All natural edges, just some stunning material. Some of these will be used in a class by Charles Neil this fall. I have some really sweet 8/4 material as well.

Let me know what you are looking for. I only sell figured lumber from Wisconsin, the UP , Iowa and Indiana. Best stuff in the world as far as I know.


4 comments:

  1. I have just finished my pine live wood slabs. It looks like.my epoxy didnt dry level. It looks.like there are shiny high spots. How can i correct this. This is my first time ever doing anything like this so i dont want to do something stupid.

    ReplyDelete
  2. I have just finished my pine live wood slabs. It looks like.my epoxy didnt dry level. It looks.like there are shiny high spots. How can i correct this. This is my first time ever doing anything like this so i dont want to do something stupid.

    ReplyDelete
  3. Mike, email me from my web site at www.bobkloes.com
    Pictures will help me see what you re talking about.

    ReplyDelete
  4. I have other project plans for the wooden pallets, I will fix our walls and floors replace it with pallets and then build a koi pond madeup of wooden pallet frame

    ReplyDelete